Bekijk hier de lijst met normen die worden geëvalueerd. Wordt er een norm vermeld die u nog gebruikt? Dan is het belangrijk om dit te melden. Wenst u een aanpassing aan de norm, dan is de systematische evaluatie hiervoor een uitgelezen moment.


Om de 5 jaar wordt van de internationale normen afgetoetst of ze nog steeds de stand der techniek weerspiegelen. Mogelijke acties zijn:

  • terugtrekken (verouderde technologie)
  • herzien (bijwerken naar de huidige stand der techniek)
  • bevestigen (norm nog steeds actueel).

Als u een aldus onder de loep genomen norm gebruikt, is het belangrijk om dit te melden. Normen waarvoor minder dan 5 landen aangeven deze te gebruiken, worden immers automatisch teruggetrokken.

Ook als u wijzigingen wenst aan een norm, dan is de systematische evaluatie een uitgelezen moment om dit te melden. U dient er wel voor te zorgen dat voldoende andere landen dit voorstel steunen. Met het oog op een eventuele herziening, kan u steeds aangeven of u bereid bent hieraan mee te werken.

Het toepassingsdomein van de norm vindt u hier

Voor onderstaande ISO normen van commissies onder het beheer van Sirris-Agoria wordt tegen 23/05/2021 een Belgisch standpunt verwacht:

Reference

Title

ISO/TC 11 Boilers and pressure vessels [STANDBY]

ISO 16528-1:2007 (vers 3)

Boilers and pressure vessels — Part 1: Performance requirements

ISO 16528-2:2007 (vers 3)

Boilers and pressure vessels — Part 2: Procedures for fulfilling the requirements of ISO 16528-1

ISO/TC 20/SC 13 Space data and information transfer systems

ISO 15893:2010 (Ed 2, vers 2)

Space data and information transfer systems — Space communications protocol specification (SCPS) — Transport protocol (SCPS-TP)

ISO 7240-20:2010 (vers 2)

Fire detection and alarm systems — Part 20: Aspirating smoke detectors

ISO/TC 23/SC 4 Tractors

ISO 11001-1:2016 (Ed 2)

Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler

ISO/TC 23/SC 7 Equipment for harvesting and conservation

ISO 4254-14:2016

Agricultural machinery — Safety — Part 14: Bale wrappers

ISO/TC 23/SC 15 Machinery for forestry

ISO 13860:2016 (Ed 2)

Machinery for forestry — Forwarders — Terms, definitions and commercial specifications

ISO 18564:2016

Machinery for forestry — Noise test code

ISO/TC 23/SC 17 Manually portable forest machinery

ISO 6534:2007 (Ed 3, vers 3)

Forestry machinery — Portable chain-saw hand-guards — Mechanical strength

ISO 7914:2002 (Ed 3, vers 3)

Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes

ISO 8334:2007 (Ed 2, vers 3)

Forestry machinery — Portable chain-saws — Determination of balance and maximum holding moment

ISO 9467:1993 (vers 6)

Forestry machinery — Portable chain-saws and brush-cutters — Exhaust system-caused fire risk

ISO/TC 23/SC 19 Agricultural electronics

ISO 12188-1:2010 (vers 3)

Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 1: Dynamic testing of satellite-based positioning devices

ISO/TC 29/SC 5 Grinding wheels and abrasives

ISO 21538:2016 (Ed 2)

Blanks for superabrasive cutting-off wheels — Mounting and fixing bores — Building construction and civil engineering

ISO 22917:2016 (Ed 2)

Precision superabrasives — Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride

ISO 8486-1:1996 (vers 5)

Bonded abrasives — Determination and designation of grain size distribution — Part 1: Macrogrits F4 to F220

ISO 8486-2:2007 (Ed 2, vers 3)

Bonded abrasives — Determination and designation of grain size distribution — Part 2: Microgrits F230 to F2000

ISO/TC 29/SC 8 Tools for pressing and moulding

ISO 11900-1:2007 (Ed 2, vers 3)

Tools for pressing — Ball-lock punch retainers — Part 1: Types A and B, rectangular and square for light duty

ISO 11901-1:2003 (Ed 2, vers 3)

Tools for pressing — Gas springs — Part 1: General specifications

ISO 16916:2016 (Ed 2)

Tools for moulding — Tool specification sheet for injection moulds

ISO 8018:2007 (Ed 2, vers 3)

Tools for moulding — Guide bushes, headed, and locating guide bushes, headed

ISO 8695:2010 (Ed 2, vers 2)

Tools for pressing — Punches — Nomenclature and terminology

ISO 9181:2007 (Ed 2, vers 3)

Tools for pressing — Round punches with 60 degrees conical head and reduced shank

ISO 9449:2007 (Ed 2, vers 3)

Tools for moulding — Centring sleeves

ISO/TC 29/SC 9 Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces

ISO 10145-1:2016 (Ed 2)

End mills with brazed helical hardmetal tips — Part 1: Dimensions of end mills with parallel shank

ISO 10145-2:2016 (Ed 2)

End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank

ISO 10889-2:2016 (Ed 3)

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

ISO 10889-3:2016 (Ed 3)

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

ISO 10889-4:2016 (Ed 3)

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

ISO 10889-5:2016 (Ed 2)

Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat

ISO 10889-6:2016 (Ed 3)

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

ISO 10889-7:2016 (Ed 3)

Tool holders with cylindrical shank — Part 7: Type F with taper seat

ISO 3286:2016 (Ed 2)

Single point cutting tools — Corner radii

ISO 3338-1:1996 (Ed 4, vers 4)

Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks

ISO 3338-3:1996 (vers 4)

Cylindrical shanks for milling cutters — Part 3: Dimensional characteristics of threaded shanks

ISO 3365:2016 (Ed 3)

Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions

ISO 3466:2016 (Ed 2)

Machine taper pin reamers with parallel shanks

ISO 3467:2016 (Ed 2)

Machine taper pin reamers with Morse taper shanks

ISO 7388-3:2016 (Ed 3)

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

ISO 9270-1:2010 (vers 2)

7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF

ISO 9270-2:2010 (vers 2)

7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF

ISO/TC 43/SC 1 Noise

ISO 1996-1:2016 (Ed 3)

Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures

ISO 6926:2016 (Ed 3)

Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels

ISO/TS 12913-2:2018

Acoustics — Soundscape — Part 2: Data collection and reporting requirements

ISO/TC 60 Gears

ISO/TR 10064-1:2019 (Ed 3)

Code of inspection practice — Part 1: Measurement of cylindrical gear tooth flanks

ISO/TR 10064-3:1996 (vers 3)

Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes

ISO/TR 10064-4:1998 (vers 3)

Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking

ISO/TR 10064-5:2005 (vers 2)

Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments

ISO/TC 70 Internal combustion engines

ISO 7967-2:2010 (Ed 2, vers 2)

Reciprocating internal combustion engines — Vocabulary of components and systems — Part 2: Main running gear

ISO/TC 92/SC 1 Fire initiation and growth

ISO 9705-1:2016

Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

ISO/TC 96/SC 5 Use, operation and maintenance

ISO 15513:2000 (vers 5)

Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors

ISO 23813:2007 (vers 3)

Cranes — Training of appointed persons

ISO 23815-1:2007 (vers 3)

Cranes — Maintenance — Part 1: General

ISO/TC 96/SC 6 Mobile cranes

ISO 8566-2:2016 (Ed 2)

Cranes — Cabins and control stations — Part 2: Mobile cranes

ISO/TC 108 Mechanical vibration, shock and condition monitoring

ISO 9688:1990 (vers 5)

Mechanical vibration and shock — Analytical methods of assessing shock resistance of mechanical systems — Information exchange between suppliers and users of analyses

ISO/TC 108/SC 2 Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures

ISO 10815:2016 (Ed 2)

Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains

ISO 13373-2:2016 (Ed 2)

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

ISO 14839-3:2006 (vers 3)

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin

ISO 20283-5:2016

Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

ISO 20816-1:2016

Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines

ISO 21940-11:2016

Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour

ISO 21940-12:2016

Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour

ISO 4866:2010 (Ed 2, vers 2)

Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures

ISO 8608:2016 (Ed 2)

Mechanical vibration — Road surface profiles — Reporting of measured data

ISO/TC 108/SC 4 Human exposure to mechanical vibration and shock

ISO 10227:1996 (vers 5)

Human/human surrogate impact (single shock) testing and evaluation — Guidance on technical aspects

ISO 10326-1:2016 (Ed 2)

Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements

ISO 13091-1:2001 (vers 4)

Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 1: Methods of measurement at the fingertips

ISO 14835-1:2016 (Ed 2)

Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature

ISO 2631-4:2001 (vers 4)

Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

ISO 5349-1:2001 (vers 4)

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements

ISO 5349-2:2001 (vers 5)

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace

ISO 9996:1996 (vers 5)

Mechanical vibration and shock — Disturbance to human activity and performance — Classification

ISO/TC 108/SC 6 Vibration and shock generating systems

ISO 15261:2004 (vers 3)

Vibration and shock generating systems — Vocabulary

ISO 5344:2004 (Ed 2, vers 3)

Electrodynamic vibration generating systems — Performance characteristics

ISO/TC 115/SC 2 Methods of measurement and testing

ISO 21630:2007 (vers 3)

Pumps — Testing — Submersible mixers for wastewater and similar applications

ISO/TC 118/SC 3 Pneumatic tools and machines

ISO 28927-4:2010 (vers 2)

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders

ISO/TC 142 Cleaning equipment for air and other gases

ISO 15957:2015 (vers 2)

Test dusts for evaluating air cleaning equipment

ISO 16891:2016

Test methods for evaluating degradation of characteristics of cleanable filter media

ISO/TC 159/SC 1 General ergonomics principles

ISO 27500:2016

The human-centred organization — Rationale and general principles

ISO/TC 159/SC 4 Ergonomics of human-system interaction

ISO 9241-129:2010 (vers 2)

Ergonomics of human-system interaction — Part 129: Guidance on software individualization

ISO 9241-161:2016

Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements

ISO 9241-391:2016

Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures

ISO/TC 159/SC 5 Ergonomics of the physical environment

ISO 24501:2010 (vers 2)

Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products

ISO 24502:2010 (vers 2)

Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light

ISO/TC 161 Controls and protective devices for gas and/or oil

ISO 23551-8:2016

Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls

ISO/TC 178 Lifts, escalators and moving walks

ISO 8383:1985 (vers 6)

Lifts on ships — Specific requirements

ISO/TC 180/SC 4 Systems - Thermal performance, reliability and durability

ISO 10303-21:2016 (Ed 3)

Industrial automation systems and integration — Product data representation and exchange — Part 21: Implementation methods: Clear text encoding of the exchange structure

ISO/TC 184/SC 5 Interoperability, integration, and architectures for enterprise systems and automation applications

IEC 62264-3:2016 (Ed 2)

Enterprise-control system integration — Part 3: Activity models of manufacturing operations management

IEC 62264-5:2016

Enterprise-control system integration — Part 5: Business to manufacturing transactions

ISO 20242-2:2010 (vers 2)

Industrial automation systems and integration — Service interface for testing applications — Part 2: Resource management service interface

ISO/TC 193 Natural gas

ISO 15403-1:2006 (vers 3)

Natural gas — Natural gas for use as a compressed fuel for vehicles — Part 1: Designation of the quality

ISO/TC 193/SC 1 Analysis of natural gas

ISO 12213-3:2006 (Ed 2, vers 3)

Natural gas — Calculation of compression factor — Part 3: Calculation using physical properties

ISO 23874:2006 (vers 3)

Natural gas — Gas chromatographic requirements for hydrocarbon dewpoint calculation

ISO/TC 213 Dimensional and geometrical product specifications and verification

ISO/TS 15530-4:2008 (vers 4)

Geometrical Product Specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 4: Evaluating task-specific measurement uncertainty using simulation

ISO/TS 21619:2018

Geometrical product specifications (GPS) — Types of documents with GPS