Om de vijf jaar wordt nagegaan of de Europese normen nog steeds de stand der techniek weerspiegelen. Bekijk hier welke normen momenteel aan evaluatie toe zijn. Deze systematische evaluatie is een uitgelezen moment om eventuele wijzigingen aan normen voor te stellen.


Vijfjaarlijks worden de Europese normen onder de loep genomen om na te gaan of ze nog steeds de stand der techniek weerspiegelen. Mogelijke acties zijn:

  • terugtrekken (verouderde technologie)
  • herzien (bijwerken naar de huidige stand der techniek)
  • bevestigen (norm nog steeds actueel).

Als u een van deze normen gebruikt,, is het belangrijk om dit te melden. Normen waarvoor minder dan 5 landen aangeven deze te gebruiken, worden immers automatisch teruggetrokken.

Wenst u wijzigingen aan de norm, dan is de systematische evaluatie een uitgelezen moment om dit te melden. U dient er wel voor te zorgen dat voldoende andere landen dit voorstel steunen. Met het oog op een eventuele herziening, kan u steeds aangeven of u bereid bent hieraan mee te werken.

Het toepassingsdomein van de norm kan u vinden via deze link. https://standards.cen.eu/dyn/www/f?p=CENWEB:105::RESET::::

Voor onderstaande CEN normen van commissies onder het beheer van Sirris-Agoria wordt tegen 19/11/2018 een Belgisch standpunt verwacht: 

Reference

Title

CEN/TC57 Central heating boilers

EN 13842:2004

Oil fired forced convection air heaters - Stationary and transportable for space heating

CEN/TC 69 Industrial valves

EN 14141:2013

Valves for natural gas transportation in pipelines - Performance requirements and tests

CEN/TC 70 Manual means of fire fighting equipment

EN 1866-3:2013

Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1

CEN/TC 93 Ladders

EN 131-2:2010+A2:2017

Ladders - Part 2: Requirements, testing, marking

CEN/TC 127 Fire safety - Constructions

EN 13381-4:2013

Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection to steel members

EN 13381-8:2013

Test methods for determining the contribution to the fire resistance of structural members - Part 8: Applied reactive protection to steel members

CEN/TC 130 Space heating appliances without integral heat sources

EN 16313:2013

Connections for heating and cooling appliances - Detachable connection with outside threaded pipe G ¾ A and inside cone

CEN/TC 132 Aluminium and aluminium alloys

EN 12020-1:2008

Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 1: Technical conditions for inspection and delivery

EN 12258-3:2003

Terms and definitions - Part 3: Scrap

EN 12482-1:1998

Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stock

EN 12482-2:1998

Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stock

EN 1301-1:2008

Drawn wire - Part 1: Technical conditions for inspection and delivery

EN 1301-2:2008

Drawn wire - Part 2: Mechanical properties

EN 1301-3:2008

Drawn wire - Part 3: Tolerances on dimensions

EN 13920-10:2003

Scrap - Part 10: Scrap consisting of used aluminium beverage cans

EN 13920-11:2003

Scrap - Part 11: Scrap consisting of aluminium-copper radiators

EN 13920-12:2003

Scrap - Part 12: Turnings consisting of one single alloy

EN 13920-13:2003

Scrap - Part 13: Mixed turnings consisting of two or more alloys

EN 13920-14:2003

Scrap - Part 14: Scrap from post-consumer aluminium packagings

EN 13920-15:2003

Scrap - Part 15: Decoated aluminium scrap from post-consumer aluminium packagings

EN 13920-16:2003

Scrap - Part 16: Scrap consisting of skimmings, drosses, spills and metallics

EN 13920-1:2003

Scrap - Part 1: General requirements, sampling and tests

EN 13920-2:2003

Scrap - Part 2: Unalloyed aluminium scrap

EN 13920-3:2003

Scrap - Part 3: Wire and cable scrap

EN 13920-4:2003

Scrap - Part 4: Scrap consisting of one single wrought alloy

EN 13920-5:2003

Scrap - Part 5: Scrap consisting of two or more wrought alloys of the same series

EN 13920-6:2003

Scrap - Part 6: Scrap consisting of two or more wrought alloys

EN 13920-7:2003

Scrap - Part 7: Scrap consisting of castings

EN 13920-8:2003

Scrap - Part 8: Scrap consisting of non-ferrous materials from shredding processes destined to aluminium separation processes

EN 13920-9:2003

Scrap - Part 9: Scrap from aluminium separation processes of non-ferrous shredded materials

EN 13957:2008

Extruded round, coiled tube for general applications - Specification

EN 13958:2008

Cold drawn, round, coiled tube for general applications - Specification

EN 13981-1:2003

Products for structural Technical conditions for inspection and delivery - Part 1: Extruded products

EN 14286:2008

Weldable rolled products for tanks for the storage and transportation of dangerous goods

EN 15530:2008

Environmental aspects of aluminium products - General guidelines for their inclusion in standards

EN 1715-1:2008

Drawing stock - Part 1: General requirements and technical conditions for inspection and delivery

EN 1715-2:2008

Drawing stock - Part 2: Specific requirements for electrical applications

EN 1715-3:2008

Drawing stock - Part 3: Specific requirements for mechanical uses (excluding welding)

EN 1715-4:2008

Drawing stock - Part 4: Specific requirements for welding applications

EN 485-3:2003

Sheet, strip and plate - Part 3: Tolerances on dimensions and form for hot-rolled products

EN 485-4:1993

Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products

EN 576:2003

Unalloyed aluminium ingots for remelting - Specifications

EN 601:2004

Castings - Chemical composition of castings for use in contact with foodstuff

EN 602:2004

Wrought products - Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff

EN 754-3:2008

Cold drawn rod/bar and tube - Part 3: Round bars, tolerances on dimensions and form

EN 754-4:2008

Cold drawn rod/bar and tube - Part 4: Square bars, tolerances on dimensions and form

EN 754-5:2008

Cold drawn rod/bar and tube - Part 5: Rectangular bars, tolerances on dimensions and form

EN 754-6:2008

Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form

EN 755-3:2008

Extruded rod/bar, tube and profiles - Part 3: Round bars, tolerances on dimensions and form

EN 755-4:2008

Extruded rod/bar, tube and profiles - Part 4: Square bars, tolerances on dimensions and form

EN 755-5:2008

Extruded rod/bar, tube and profiles - Part 5: Rectangular bars, tolerances on dimensions and form

EN 755-6:2008

Extruded rod/bar, tube and profiles - Part 6: Hexagonal bars, tolerances on dimensions and form

CEN/TC 133 Copper and copper alloys

EN 13600:2013

Seamless copper tubes for electrical purposes

EN 13602:2013

Drawn, round copper wire for the manufacture of electrical conductors

EN 13604:2013

Semiconductor devices, electronic and vacuum products made from high conductivity copper

CEN/TC 142 Woodworking machines - Safety

EN 1870-10:2013

Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines

CEN/TC 144 Tractors and machinery for agriculture and forestry

EN 1374:2000+A1:2010

Agricultural machinery - Silos stationary unloaders for round silos - Safety

CEN/TC 146 Packaging machines - Safety

EN 415-6:2013

Safety of packaging machines - Part 6: Pallet wrapping machines

CEN/TC 156 Building ventilation

EN 13141-2:2010

Ventilation for buildings - Performance testing of components/products for residential ventilation - Part 2: Exhaust and supply air terminal devices

EN 15727:2010

Ventilation for buildings - Ducts and ductwork components, leakage classification and testing

CEN/TC 190 Foundry technology

EN 12680-2:2003

Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components

CEN/TC 192 Fire and Rescue Service Equipment

EN 1777:2010

Hydraulic platforms (HPs) for fire fighting and rescue services - Safety requirements and testing

CEN/TC 209 Zinc and zinc alloys

EN 1179:2003

Primary zinc

EN 12060:1997

Method of sampling - Specifications

EN 12441-10:2004

Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method

EN 12441-11:2006

Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method

EN 12441-1:2001

Chemical analysis - Part 1: Determination of aluminium in zinc alloys - Titrimetric method

EN 12441-2:2001

Chemical analysis - Part 2: Determination of magnesium in zinc alloys - Flame atomic absorption spectrometric method

EN 12441-3:2001

Chemical analysis - Part 3: Determination of lead, cadmium and copper - Flame atomic absorption spectrometric method

EN 12441-4:2003

Chemical analysis - Part 4: Determination of iron in zinc alloys - Spectrophotometric method

EN 12441-5:2003

Chemical analysis - Part 5: Determination of iron in primary zinc - Spectrophotometric method

EN 12441-6:2003

Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric method

EN 12441-7:2004

Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction

EN 12441-8:2004

Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method

EN 12441-9:2004

Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method

EN 12844:1998

Castings - Specifications

EN 13283:2002

Secondary zinc

EN 14290:2004

Secondary raw material

EN 1559-6:1998

Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings

EN 1774:1997

Alloys for foundry purposes - Ingot and liquid

EN 988:1996

Specifications for rolled flat products for building

CEN/TC 232 Compressors, vacuum pumps and their systems

EN 1012-2:1996+A1:2009

Compressors and vacuum pumps - Safety requirements - Part 2: Vacuum pumps

CEN/TC 256 Railway applications

EN 13231-1:2013

Track - Acceptance of works - Part 1: Works on ballasted track - Plain line, switches and crossings

EN 13298:2003

Suspension components - Helical suspension springs, steel

EN 13597:2003

Rubber suspension components - Rubber diaphragms for pneumatic suspension springs

EN 13913:2003

Rubber suspension components - Elastomer-based mechanical parts

EN 14200:2004

Suspension components - Parabolic springs, steel

CEN/TC 286 Liquefied petroleum gas equipment and accessories

EN 12805:2002

Automotive LPG components - Containers

EN 13776:2013

LPG equipment and accessories - Filling and discharge procedures for LPG road tankers

EN 14678-2:2007+A1:2012

LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 2: Components other than dispensers and installation requirements

EN 14894:2013

LPG equipment and accessories - Cylinder and drum marking

CEN/TC 296 Tanks for the transport of dangerous goods

EN 13081:2008+A1:2012

Service equipment for tanks - Vapour collection adaptor and coupler

EN 13082:2008+A1:2012

Service equipment for tanks - Vapour transfer valve

EN 13083:2008+A1:2013

Service equipment for tanks - Adaptor for bottom loading and unloading